Microtest MICROSCANNER Guide de l'utilisateur télécharger pdf (Page 12)

MICROSCANNER

ENGLISH - 12

Some early model 100TX only network equipment

does not generate link pulses and

MICROSCANNER will display HUB, the cable

length and the word SIGNAL.

Network Link Indicator (MICROSCANNER PRO)

The Network Link Indicator allows you to find

and identify active network 10/100 hubs and

confirm to which hub MICROSCANNER is

connected. It will blink the hubs status indicator to

assist locating a single channel in a busy wiring

closet.

1. Connect the cable to be tested to the MAIN

jack (identified on the unit right above the

modular 8 jack).

2. To display the length screen, press the

MODE key until the word LENGTH appears

on the screen. MICROSCANNER displays

the word Hub followed by the length to the

hub.

3. When MICROSCANNER displays Hub and

the cable length, press the MODE key to

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Microtest MICROSCANNER Guide de l'utilisateur Page 12