Microtest MICROSCANNER Spécifications télécharger pdf (Page 25)

MicroScanner Pro™

Toner

Toner is a cable tracing function that assists in tracking

cables hidden in walls, ceilings, floors, or patch panels

by generating four distinct multi-tone signals that can

be received by a cable tracer.

To trace a cable, use any inductive probe capable of

receiving a 1000 Hz signal, such as the Fluke Networks

MicroProbe, IntelliTone Probe, or any equivalent

tracing device to convert a signal on the cable into an

audible tone. To determine the cable path, simply trace

along the wire using the audible tone as a guide.

The tracer needs to be within one foot of the hidden

cable. You may select one of four different tone

sequences, displayed as the numbers 1-4 on the LCD.

1. To display the Toner screen, press the MODE key

until the words SIGNAL and TONE are displayed

on the screen.

2. To select a different tone sequence, press the

or key.

Display for time frames with #3 signal tone

aue27f.eps

To enhance the signal insert a grounding plug into the

ground jack located next to the MAIN and LOOPBACK

jacks. You may use any grounding cable that has a

standard insulated phone tip plug.

1 2 ... 20 21 22 23 24 25 26 27 28

Pas de commentaire

Microtest MICROSCANNER Spécifications Page 25